Configure push notifications for panel events (web)

Push notifications are supported by the SPC Connect app from version 1.5. A device is automatically registered with SPC Connect when you log in to the SPC Connect app on that device. If you update the app, push notifications are deactivated and you must log in again to reactivate them. See The Account Devices page for more information on device management. You can configure which panel events you want to receive push notifications for: the list of selected events is applicable to all of your registered devices. Vanderbilt cannot guarantee the delivery of push notifications. In particular, if your iOS/Android device goes into low power/power saving mode, the push notification feature on the device may be disabled, and you may not receive messages from the SPC Connect server. Push notification is not a substitute for professional monitoring services.

To configure which push notifications are sent to a registered device:

1. On the Panels tab, locate the panel for which you want to configure push notifications in the List of Panels table.

2. In the List of Panels table, click Edit beside the panel.

3. On the Panel Settings page, click beside Event Push Notification to show the push notification configuration area.

4. Under Event Push Notification:

   1. In the Push Notification Devices list, select the check box for each of your registered devices that should receive push notifications.

   2. In the Push Notification Event Filter list, select the check box for each panel event that should result in a push notification to the selected device(s).

5. Click Save.