Open topic with navigation

Soft Engineer programming via the keypad

This section provides [Soft] Engineer programming options using the LCD keypad.

For each menu option, the keypad must be in Engineer programming:

  1. Enter a valid Engineer PIN. (Default Engineer PIN is 1111. For more details, see Engineer PINs.)
  2. Using the up/down arrow keys, scroll to the desired programming option.

  3. It is also possible to select a programming option using the keypad digits, enter the Engineer programming PIN plus the digit as shown in the table below.

    If you change one of the programming options, the keypad displays UPDATED momentarily.

    Number Name Description

    1

    SETTING

    Performs an Unset, Fullset or Partset on the system.

    2

    INHIBIT

    Displays a list of the Inhibited zones on the system.

    3

    ISOLATE

    Allows the engineer to isolate zones on the system. See Isolate.

    4

    EVENT LOG

    Displays a list of the most recent events on the system. See Event Log.

    5

    ACCESS LOG

    Displays a list of the most recent access to the system. See Access Log.

    6

    ALARM LOG

    Displays a list of recent alarms. See Alarm Log.

    7

    CHANGE ENG PIN

    Allows the engineer to change the Engineer PIN. See Change Engineer Pin.

    8

    USERS

    Allows the engineer to add, edit or delete users. See Users.

    9

    SMS

    Allows the user to add, edit or delete SMS details for users. See SMS.

See also

Test

Door Control

Engineer programming via the keypad

Installer Text

Set Date/Time

SMS