Panel Information

Displays the IP address for the panel. You can edit this value.

If you change the IP address, when you click Save the panel is updated with the new IP address. Ensure that the new IP address is valid and available before saving.

Note: If this panel is in your Local Panels list, you must update the value on the Installation Details page or you will not be able to establish a connection to the panel from the Local Panels page.

Displays the subnet mask for the panel. You can edit this value.

Displays the gateway for the panel. You can edit this value.

Displays the DNS server for the panel. You can edit this value.

Select this check box if DHCP is enabled.

If DHCP is enabled, the above fields are hidden: values are obtained automatically from the DHCP server.

SPC Connect Pro in the panel (This area only appears for panels with firmware version 3.8.5 and later. Changes are saved to the panel when you click Save.)

Select this check box if the panel supports connections from SPC Connect Pro.

Select this check box if SPC Connect Pro can connect to the panel using ethernet.

Enter the TCP port on which the panel listens to incoming connections from SPC Connect Pro.

Select this check box if SPC Connect Pro can connect to the panel using a serial connection.

Select this check box if SPC Connect Pro can connect to the panel using a USB connection.