X10 Config - Settings

The X10 settings page allows you to configure the operation of X10 on the panel.

1. Select Configuration > Outputs > X-10.

2. Activate the checkbox Enable to enable X10 operation on the panel.

3. Activate the checkbox Log to enable logging of all X10 events on the panel.

4. Click Save.

5. Click an alphabetic tab (A-P) to program X10 device triggers.

   A list of programmable device triggers (1–16) will be presented for that alphabetic character.

   Unit number	This is the number (1–16) that is assigned to the device.
   Active	This field indicates if the device is active or not.
   Description	This field displays a description that is used to help identify the device – for example, downstairs light (16 characters max).
   Quick key	This field indicates if the X10 device activation can be toggled by entering a code from the keypad.

To edit a X-10 device

1. Click Edit.

2. For further programming, see Triggers.