WPAN personal alarm button

The WPAN personal alarm button is a device that is used to transmit Panic Alarm messages to the SPC system.

The user can wear the WPAN in one of two ways:

• WPAN can be worn as a wrist watch (by inserting the wrist band into the two slits of the appropriate ring holder).

• WPAN can be worn as a pendant by removing the wrist ring holder and replacing it with the pendant ring holder.

Enrol a WPAN personal alarm button

To enrol the WPAN and assign it to a User(n):

1. Select USERS > EDIT > USER(n) > RF FOB > ENABLED.

   The keypad displays the ADD screen with a flashing ENROL DEVICE message.

2. On the WPAN, press and hold the button.

   The LEDs on the fob light in the following pattern: Red lights for 3 seconds, then no LED, then Red lights for 1 second, and then Green lights for 1 second. The WPAN is assigned to User (n).

Disable a WPAN personal alarm button

To disable the WPAN:

Select USERS > EDIT > USER(n) > RF FOB > DISABLED.

A message appears on-screen saying UPDATED.