Soak Test

A Soak Test provides a method of putting selected zones on test. Zones on soak test do not cause any alarms but are recorded in the event log. Zones on soak test will remain on soak test until the soak test timer expires as in the timers default (14 days).

To perform a soak test:

  1. Scroll to SOAK TEST and press SELECT.

  2. Toggle between ENABLE SOAK and CANCEL SOAK for preferred option.

  3. Scroll to preferred zone and press SELECT.

    A message confirming that the zone is in soak is displayed.

 

NOTICE: All zone types can be included in a Soak test.