Ethernet interface

Connect

Number

Description

1

JP9

2

Ethernet port

3

To Ethernet port on PC

 

 

If the SPC Ethernet interface is connected to an existing Local Area Network (LAN), consult the network administrator for that LAN before connecting to the panel. Default IP Address: 192.168.1.100.

Connect the cable

  • Connect an Ethernet cable from the Ethernet interface on the PC to the Ethernet port on the controller board

    – OR –

    If connecting directly from a PC then a cross over-cable must be used. See Network cable connections.

    The LEDs to the right of the Ethernet interface indicate a successful data connection (right LED on) and Ethernet data traffic (left LED flashing).

Determine the IP address of the SPC controller

  1. Entering the Engineer mode (see Engineer PINs).

  2. Using the up/down arrow keys, scroll down COMMUNICATION option and press SELECT.

  3. Scroll to ETHERNET PORT and press SELECT.

  4. Scroll to IP ADDRESS and press SELECT.