Engineer programming via the browser
Engineer programming options on the SPC panel can be accessed via any standard web browser on a PC and is PIN protected.
You can access Engineer Programming via the browser by entering the default Engineer PIN (1111). For more details, see Engineer PINs.
This web server provides access to the complete set of programming features used to install and configure the SPC system.
|
This programming option should only be provided to authorized installers of the SPC system. |
Engineer Programming features on the SPC are divided into the following categories:
Soft Engineer Features
These features can be programmed without requiring the alarm system to be deactivated; they are accessible directly upon entering Engineer mode.
Full Engineer Features
These features require the alarm system to be deactivated before programming can commence; these features are accessible under the Full Engineer menu.
|
NOTICE: If ‘Engineer Exit’ option is enabled in System Options, the engineer is allowed leave Full Engineer mode with alerts active but must acknowledge all alerts listed on the keypad or in the browser before switching from Full Engineer mode to Soft Engineer mode. |
The web server on SPC controller can be accessed using either the Ethernet or USB interface.
|
If programming with a browser interface, click Save when making changes. |