Data entry on the LCD keypad

Entering data and navigating the menus on the LCD keypad is facilitated through the use of the programming interface. The use of the interface for each type of operation is detailed below.

Entering numeric values

In Numeric Entry mode, only the numeric digits (0–9) can be entered.

To move the position of the cursor one character to the left and right respectively, press the left and right arrow keys.
To exit from the feature without saving, press the BACK menu key.
To save the programmed setting press ENTER or OK.

Entering text

In Text Entry mode, both alphabetic characters (A–Z) and numeric digits (0–9) can be entered.

To enter an alphabetic character, press the relevant key the required number of times.
To enter a language specific special character (ä, ü, ö…) press button 1 to cycle through the special characters.
To enter a space + special characters (+, -./[ ]…) press button 0.
To enter a digit, hold the relevant key down for 2 seconds and release.
To move the position of the cursor one character to the left and right respectively, press the left and right arrow keys.
To exit from the feature without saving, press BACK.
To save the programmed setting press ENTER or OK.
To change the case of an alphabetic character, press the up/down arrow keys when the character is highlighted by the cursor.
To toggle between upper and lower case for all subsequent characters, press the hash (#) key.
To delete character to the left of the cursor, press the star key(*).

Selecting a programming option

In navigation mode, the Engineer/User selects one of a number of pre-defined programming options from a list.

To scroll through the list of options available for selection, press the up and down arrow keys.
To exit from the feature without saving, press BACK.
To save the selected option, press SAVE or OK.