Configuring an SPC Connect ATS

The Add SPC Connect ATS functionality opens a communication between the panel (SPT) and the SPC Connect server (RCT), www.spcconnect.com. Using the generated SPC Connect ATS Registration ID, a panel user can register a user account and panel with the SPC Connect website to access their panel remotely.

1. To configure an SPC Connect ATS, go to Communications > FlexC > FlexC ATS.

2. On the ATS Configuration page, click Add SPC Connect to open a communication path with the SPC Connect server.

   An SPC Connect ATS is added to the Event Sequence Table with the following attributes:

   • SPC Connect ATS Registration ID

   • Default ATP over Ethernet. For information on ATP fields, see Add ATP to FlexC RCT.

   • Default Events Profile for SPC Connect

   • Default Commands Profile for SPC Connect

   • Default RCT URL is www.spcconnect.com

   • The SPT Account Code for the ATP is populated.

   • Make a note of the SPC Connect ATS Registration ID and provide this to the customer along with the SPC Connect System User Guide.