CEI-ABI Protocol Settings

  1. Select Communications > Reporting > CEI-ABI.

  2. Configure the fields as described in the table below.

    Enable

    Tick this box to enable CEI-ABI support.

    Connection mode

    • Select Client to connect the panel to the CEI-ABI receiver.

    • Select Server to enable the panel to listen for connections.

    Server IP

    If you select Client for Connection mode, enter the TCP/IP address of the CEI-ABI receiver.

    Server Port

    Enter the IP port for the server.

    Physical address

    Enter a physical address for the CEI-ABI on the panel.

    Logical address

    Enter a logical address for the CEI-ABI on the panel.