Wireless Sensors

Add Sensors

To add a wireless sensor device:

1. Scroll to WIRELESS > SENSORS > ADD and press OK.

   A menu of enrolment options opens. Options are:

   • ENROL

   • TAMPER ENROL

   • ACTIVATE ENROL

2. Scroll to your desired option and press OK.

   The display flashes the text ENROL DEVICE.

3. Activate the wireless device by inserting the battery/batteries to allow the keypad receiver to detect the wireless transmission of the device.

   When the device has been detected the text FOUND SENSOR is displayed on the keypad. The device ID, TYPE, and SIGNAL information is displayed beneath FOUND SENSOR.

4. Press OK.

   A prompt to select the area is displayed.

5. Scroll to the desired option and press OK.

   A prompt to select a zone type is displayed.

6. Scroll to the required zone type and press OK.

Edit Sensors (Zone Assignment)

It may be necessary to change the zone assignment of a sensor enrolled on the system.

To change the zone assignment of a wireless detector:

1. Scroll to EDIT and press OK.

2. Scroll to the sensor to be changed and press OK.

3. Scroll to ZONE and press OK.

4. Scroll to the appropriate zone number (only unoccupied zone numbers are displayed) and press OK.