Remove a panel (web)

If you no longer want to access a panel through SPC Connect, you can remove it using the procedure below. Before removing a panel, make a note of the Panel Registration ID in case you need to re-add it.

When you remove a panel, the panel is only removed from your list of panels: the panel connection to SPC Connect still exists, and the Panel Manager for the panel and any other Standard Users with access to the panel can still see the panel in their panel lists. A Panel Manager can only remove a panel if either there are no Standard Users with access to that panel, or if there is at least one other Panel Manager with access to the panel. See SPC Connect system users for more information on Panel Manager and Standard User access.

1. Click Panels in the site navigation.

2. On the List of Panels page, locate the panel you want to remove in the list.

   If you are a Panel Manager, the Remove icon is not enabled if you are the last Panel Manager registered on the panel and there are still Standard Users registered on the panel: you must either promote at least one Standard User to Panel Manager, or remove all Standard Users from the panel before you can remove the panel.

   To promote a Standard User to Panel Manager:

   1. Click Edit beside the panel to open the Panel Settings page.

   2. Scroll down to the Users with Panel Access table.

   3. In the Set Access Level column, click Promote beside the Standard User you want to promote to a Panel Manager.

   4. Return to the List of Panels page.

   To remove Standard Users:

   1. Click Edit beside the panel to open the Panel Settings page.

   2. Scroll down to the Users with Panel Access table.

   3. Click Remove Access for each user with Standard User access.

   4. Return to the List of Panels page.

3. In the List of Panels table, click Remove   beside the panel.