The Site Summary screen (Android)
To display the Site Summary screen, tap a site/panel name on the app Home screen. See The Home screen (Android) for more information.
The Site Summary screen shows the following:
Panel |
Displays the current panel status. Tap an icon to Unset/Partset/Fullset the panel. |
Verification zones |
Displays a list of the verification zones configured on the panel. Note: If your panel is not registered to an installation company, this feature is not available. Verification zones are only available for panels registered to installation companies if your installer supports this feature. Tap a zone to open a screen where you can access AV verification functions for that zone.
|
Alarms |
Displays a list of all the alarms currently triggered. Tap an item in the list to see the following options:
|
Areas |
Displays all the areas connected to the panel and the status of each area. If Show info for last set/unset event is enabled on the Settings screen, details of the last fullset/unset are shown for each area. Tap a specific area to see one or more of the following options, depending on the current area status:
|
Inhibits & Isolates |
Displays all the current inhibits and isolates related to the panel. Tap a specific inhibit/isolate to see options to Deinhibit/Deisolate. |
Simulate Burglary |
This option appears for the demo site: tap to simulate a burglary so that you can see what triggered alarms. |
See The Site screen (Android) for information on the top and footer navigation options on this screen.