The Add Panel and Edit Panel screens (Android)

To display the Add Panel screen, tap Add Panel on the Panels screen. To display the Edit Panel screen, tap a registered panel in the list on the Panels screen, then tap Edit /Notifications in the menu that appears.

Both screens show the following:

Site Name

Enter an identifying name for the site that appears throughout the app.

Reg. ID

Enter the ATS registration ID from the panel.

Note: This field is only editable when adding a panel. When editing a panel, this field is read-only.

Panel Username

Panel Password

Enter the username and password to use when connecting to the panel.

Note: This field is only editable when adding a panel. When editing a panel, this field is read-only.

Enable notifications for this panel

Select to Enable notifications for this panel, then toggle on/off specific panel events for which you wish to receive push notifications from the app.

Note: Vanderbilt cannot guarantee the delivery of push notifications. In particular, if your iOS/Android device goes into low power/power saving mode, the push notification feature on the device may be disabled, and you may not receive messages from the SPC Connect server. Push notification is not a substitute for professional monitoring services.

To add a panel, enter all details, then tap Send.

To edit panel details, edit the site name, then tap Send.