Open topic with navigation

SPC6000

Programmable areas

60

Max. number of user PINs

2500

Remote controls

Up to 100
PACE Devices

250

Wireless Panic Alarm

Up to 128

Event memory

10,000 intrusion events, 10,000 access events

Number of on-board zones
  • SPC6320/6330 — 8
  • SPC6350 — 16

Max. number of hardwired zones

512

Max. number of wireless zones

120 (take away wired zones)

Max. number of Intrunet wireless detectors per wireless receiver (recommended)

20

EOL resistor

Dual 4k7 (default), other resistor combinations configurable

Relay Outputs
  • SPC6320/6330 — 1 strobe (30V DC/1A resistive switching current)
  • SPC6350 — 4 (single-pole changeover, 30V DC/ maximum 1A resistive switching current)

Electronic Outputs

  • SP6320/6330 — 5 outputs:

    – 2 internal/external bells

    – 3 programmable. Maximum 400mA resistive switching current per output, supplied by auxiliary output.

  • SPC6350 — 8 outputs. Maximum 400mA resistive switching current per output

    – 5 standard power outputs

    – 3 supervised outputs

Firmware

V3.x

Door capacity

Max. 64 entry doors or 32 entry/exit doors

Number of card reader

Max. 64

Radio module

Optional (SPCW110)

Verification

32 verification zones with max. 4 IP-cameras and 32 audio devices.

Video

Up to 16 pre/16 post event images (by JPEG resolution 320 x 240, max. 1 frame/sec.)

Audio

Up to 60sec. pre/60sec. post audio recording

Field bus 1)

X-BUS on RS-485 (307kb/s)

Number of field devices 2)

Max. 128 (32 keypads, 32 door-expanders, 64 input/output expanders)

Connectable field devices
  • Keypads: SPCK42x, SPCK62x
  • Door expanders: SPCA210, SPCP43x
  • Expanders with I/O: SPCE65x, SPCE45x, SPCP33x, SPCP35x, SPCE110, SPCE120, SPCV32x

Interfaces
  • 2 X-BUS (2 spurs or 1 loop)
  • 2 RS232
  • 1 USB (PC connection)
  • SPC63xx: Additionally 1 Ethernet (RJ45)

Tamper contact

  • SPC6330: Front spring tamper, 2 auxiliary tamper contact inputs
  • SPC6350: Front/back tamper switch

Power supply

Type A (per EN50131-1)

Mains voltage

230V AC, +10%/-15%, 50Hz

Mains fuse
  • SPC6330: 250mA T (replaceable part on mains terminal block)
  • SPC6350: 800mA T (replaceable part on mains terminal block)

Power consumption
  • SPC6330: Max. 200mA at 230V AC
  • SPC6350: Max. 500mA at 230V AC

Operating current
  • SPC6330: Max. 200mA at 12V DC
  • SPC6350: Max. 210mA at 12V DC

Quiescent current

SPC63xx Controller: Max. 170mA at 12V DC (195mA with PSTN, 300mA with GSM, 325mA with PSTN and GSM)

Output voltage
  • SPC6330: 13–14V DC in normal conditions (mains powered and fully charged battery), min. 10.5V DC when powered by secondary device (before system shut down to battery deep discharge protection)
  • SPC6350: 13–14V DC in normal conditions (mains powered and fully charged battery), min. 10.5V DC when powered by secondary device (before system shut down to battery deep discharge protection)

Low voltage trigger

11V DC

Overvoltage protection
  • SPC6330: 15.7V DC
  • SPC6350: 15V DC nominal

Peak to Peak ripple

Max. 5% of output voltage

Auxiliary power (nominal)
  • SPC6330: Max. 750mA at 12V DC
  • SPC6350: Max. 2200mA at 12V DC (8 separately fused outputs, 300mA per output)

Battery type
  • SPC6330: YUASA NP17-12FR (17Ah)
  • SPC6350: YUASA NP24-12 (12V 24Ah), Alarmcom AB1227-O (12V 27Ah)
  • SPC6350: FIAMM FGV22703 (12V 27Ah)

Battery not supplied

Battery charger

SPC63xx: Max. 24h to 80% of battery capacity

Battery protection
  • SPC6330: Current limited to 1A (fuse protected), deep discharge protection at 10.5V DC +/- 3%
  • SPC6350: Current limited to 2A (protected by PTC resettable fuse), deep discharge protection at 10.5V DC, low voltage indicator at 11V DC

Software update

Local and remote upgrade for controller, peripherals and GSM/PTSN modems.

Calibration

No calibration checks required (calibrated at manufacturing)

Serviceable parts
  • SPC6330: No serviceable parts
  • SPC6350: 8 glass fuses (400mA AT) for 12V DC outputs

Operating temperature

-10 to +50°C

Relative humidity

Max. 90% (non condensing)

Colour

RAL 9003 (signal white)

Weight
  • SPC6330: 6.400kg
  • SPC6350: 18.600kg

Dimensions (W x H x D)
  • SPC6330: 326 x 415 x 114mm
  • SPC6350: 498 x 664 x 157mm

Housing
  • SPC6330: Hinged metal housing (1.2mm mild steel)
  • SPC6350: Metal housing (1.5mm mild steel)

Housing can contain up to
  • SPC6330: 4 additional expanders (size 150 x 82mm)
  • SPC6350: 6 additional expanders (150 x 82mm) or 1 additional controller + 4 expanders

IP/IK Rating

30/06

ATS

10

ATP

30

Event Profiles

20

Event Exceptions

100

Command Profiles

10

1) Max. 400 m between devices/cable types IYSTY 2 x 2 x Ø 0.6mm (min.), UTP cat5 (solid core) or Belden 9829.

2) More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs/outputs cannot exceed specified system limits.