Keypad Status

You are here:

Keypad Status

Select Status > Hardware > X-Bus Status.
Select the Keypads tab.

A list of detected keypads is displayed.

Name	Description
Expander ID	This ID number is a unique identifier for the keypad.
Description	Text description of the keypad (max. 16 characters).
Type	The type of expander detected (=keypad).
S/N	The serial number of the keypad.
Version	The firmware version of the keypad.
Comms	The status of the keypad (online or offline).
Status	The status of the keypad (OK, Fault).

Performable actions

Refresh

Click the Refresh button to update the list of detected keypads and their status.

To view more status information:

Click a keypad’s identifying parameters (ID, description, type, serial number) to display further status details.

Communication	The physical status (OK, Fault) and the programmed status (OK, Isolated, Inhibited) of the keypad cable connection to the expander.
Housing Tamper	The physical and programmed status of the expander housing tamper.
PACE	Applies only to Keypads with a PACE receiver installed.
Panic	Keypad panic alarm status.
Fire	Keypad Fire alarm status.
Medical	Keypad medical alarm status.
Code Tamper	Keypad PIN tamper alarm status

Performable actions

Restore Alerts

Click the button to restore all alerts on the panel.

Inhibit

Click this button to inhibit a fault condition. The inhibit operation will disable that fault or zone for one arming period only.
Inhibit operation is not available in Security Grade EN 50131 Grade 3.

Isolate

Click this button to isolate that zone. Isolating a zone will de-activate that zone until such time as the zone is explicitly de-isolated again. It is recommended that you exercise caution when isolating zones as those zones will not be active every time the system is SET.