The Ethernet port on the controller can be configured from both the browser and keypad interfaces. An Ethernet connection with the SPC controller can be established using a direct connection or a LAN connection.
Select Communications > Communications > Ethernet.
Configure the fields as described in the table below.
|
IP address |
Enter the IP address of the panel. |
|
IP Network |
Enter the subnet mask that defines the type of network address structure implemented on the Local Area Network (LAN). |
|
Gateway IP Address |
Enter the IP address of the IP gateway if one exists. This is the address that IP packets will be routed through when accessing external IP addresses on the internet. |
|
Enable DHCP |
Click this Button to enable dynamic address assignment on the panel. |
|
DNS Server |
Enter the IP address of the DNS server. |