Open topic with navigation

CEI-ABI Protocol Settings

1. Select Communications > Reporting > CEI-ABI.

2. Configure the fields as described in the table below.

   Enable	Tick this box to enable CEI-ABI support.
   Connection mode	Select Client to connect the panel to the CEI-ABI receiver. Select Server to enable the panel to listen for connections.
   Server IP	If you select Client for Connection mode, enter the TCP/IP address of the CEI-ABI receiver.
   Server Port	Enter the IP port for the server.
   Physical address	Enter a physical address for the CEI-ABI on the panel.
   Logical address	Enter a logical address for the CEI-ABI on the panel.