Door Controller Status
-
Select Status > Hardware > X-Bus Status.
-
Select the Door Controllers tab.
A list of detected door controllers is displayed.
|
Name |
Description |
|---|---|
|
Expander ID |
This ID number is a unique identifier for the door controller. |
|
Description |
Text description of the door controller (max. 16 characters). |
|
Type |
The type of expander detected (=door controller). |
|
S/N |
The serial number of the door controller. |
|
Version |
The firmware version of the door controller. |
|
Comms |
The status of the door controller (online or offline). |
|
Status |
The status of the door controller (OK, Fault). |
|
PSU |
Specifies if the door controller has a PSU. |
Performable actions
|
Refresh |
Click the Refresh button to update the status of the system alerts. |
To view more status information:
-
Click a door controller’s identifying parameters (ID, description, type, serial number) to display further status details.
|
Communication |
The physical status (OK, Fault) and the programmed status (OK, Isolated, Inhibited) of the keypad cable connection to the expander. |
|
Housing Tamper |
The physical and programmed status of the expander housing tamper. |
|
Fuse Fault |
The physical and programmed status of the door controller fuse. |
|
Code Tamper |
Status of the user’s PIN. Multiple failed attempts result in an alert. |
Performable actions
|
Restore Alerts |
Click the button to restore all alerts on the panel. |
|
Inhibit
|
Click this button to inhibit a fault condition. The inhibit operation will disable that fault or zone for one arming period only. |
|
Isolate |
Click this button to isolate that zone. Isolating a zone will de-activate that zone until such time as the zone is explicitly de-isolated again. It is recommended that you exercise caution when isolating zones as those zones will not be active every time the system is SET. |
