Events

Product Version(s): SPC Connect 3.0, SPC Affinity, SPC Affinity CMS

Topic last updated: January 2020

The Events operation enables an installer to view a list of events from a single site or from any site within a list of multiple sites. The last 50 events for every site in the company are saved in the server memory.

As a single site operation, the Events operation supports:

  • Sorting and filtering of events based on time/SPC panel/site/event type.

  • Displaying event descriptions and additional information associated with the events.

  • Connecting to a panel's on-board webpage.

  • Linking to an associated AV Verification – Archive events.

In addition, as a multi-site operation the Events operation supports

  • Displaying events for multiple sites (Site Groups/All Sites/Favourite Sites).

  • Highlighting events by colour based on the event type (SIA code).

  • Viewing in full-screen, auto-refresh mode (with manual pausing).

    Note: Only available in SPC Affinity and CMS applications.

An installer with access to the site (installer and site need to be part of a site group) and with the Events installer right enabled.

An installer with access to the site group, and with the Events installer right enabled

Enable the Multisite Events operation on the Operation Settings page for the relevant site group ( Configuration > Site Groups > Operation Settings ).

Ensure that each SPC panel in the site(s) in the site group uses the command profile Default Commands [SPC Connect] or a similar command profile.

Click Operations > Multisite Operations, and click Events beside the relevant site group.

Click Operations > Site Operations, then click the down-arrow beside System Summary for the relevant site and click Events.